Built to plan
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Framing in Toronto
Triplex Framing in Toronto
Triplex framing in Toronto and across the GTA, built to your drawings and the Ontario Building Code. Timberr Framing is licensed, insured and WSIB-covered, rated 5.0 on Google, with a workmanship warranty behind every job.
- Licensed, Insured & WSIB-Covered
- Backed by our workmanship warranty
- 5.0 on Google
Get your Toronto framing quote
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
5.0 on Google
Workmanship warranty, we stand behind our work Licensed, Insured & WSIB-Covered Completed to code & Ontario requirements Custom-framed to your plans Serving the GTA & surrounding area
What You Get
What to expect from triplex framing in Toronto
Built to last
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Quote-ready
Send specs, drawings, or photos and get a free, no-obligation site visit and estimate with no guesswork.
Code-conscious
Installation and site work completed in accordance with Ontario requirements.
Our Process
How the work moves from drawings to handoff
Ready to price triplex framing?
Send the drawings, or just the address and what you are building. We will tell you what is missing and what happens next.
What GTA clients say
5.0 · Verified reviews on Google B Brookevia Google
★★★★★
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
T Trudyvia Google
★★★★★
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
W Williamvia Google
★★★★★
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
S Sokratisvia Google
★★★★★
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
E Ericavia Google
★★★★★
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
C Cesarvia Google
★★★★★
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
Local Context
Triplex Framing in Toronto
Understanding triplex framing
What the crew checks in Toronto
Toronto Building administers permits and inspections for the address. Permit-approved drawings must be available on site for inspection. A street-occupation permit applies when materials, equipment, a crane or a disposal container occupies a road, sidewalk, boulevard or public lane.
Toronto warns that covered work may have to be uncovered, so the triplex frame stays open through booked inspection. Work on a designated heritage property or in a heritage conservation district can require heritage review before the building permit is ready. Citywide multiplex permission does not replace the building permit or the address-specific zoning review.
What belongs in the Toronto site scope
At the address, we verify unit layouts, bearing lines, openings and separation details. We also confirm how lumber, engineered members and site access will reach and move through the work area. The quote separates structural changes, unit layout, separations, openings, services and access. Any unresolved drawing, access or inspection condition is named instead of being priced as if it were settled.
The systems and conditions that change the work
A one-unit-per-storey layout concentrates suite separation in two floor-ceiling planes, while a side-by-side arrangement relies more heavily on vertical separations. That means your engineer may need to settle the load path before material is ordered.
A unit occupying two or more storeys, including a basement, generally requires a 1 h separation from the rest of a Part 9 residential building, subject to the listed exceptions. That means your quote carries the matching member layout, connector schedule and site handling.
Other residential suites generally require at least a 45 min fire separation from adjacent rooms and suites under the Part 9 provision. That means you get the route supported by the drawings instead of a choice made from habit.
Public corridors generally require at least a 45 min fire separation from the rest of a Part 9 building, subject to the stated exceptions. That means your following trades inherit that system's spacing, openings and limits.
Problems worth preventing before they disappear behind finishes
Failure: assuming three units means one unit per floor. Prevention: quote the approved layout and name the actual unit boundaries, which means you do not inherit that condition after it is concealed. Failure: ending a vertical separation at an open concealed ceiling space. Prevention: continue or cap the separation as required by the approved assembly, which means you can correct the load path or assembly while the work remains accessible.
Failure: placing an upper bearing wall over unsupported joists. Prevention: align support or obtain designed transfer framing, which means your approved repair is documented before the next trade arrives. We stop a conflict involving a one-unit-per-storey layout concentrates suite separation in two floor-ceiling planes, because you need the designer's answer before an improvised fix becomes permanent.
Plans, sequencing, and site decisions
Member and fastening decisions that affect the result
Part 9 loadbearing studs use the grades listed for that purpose. Framing lumber is installed at no more than 19 percent moisture content. That means your installed member must match the grade or product shown in the design. Stud size and spacing depend on unsupported height and supported floor and roof loads, which means you can verify the material condition before it is enclosed.
Floor-joist end bearing is at least 38 mm unless the permitted ribbon-board support is used, which means your bearing and connection detail must preserve that capacity. Beam ends generally require at least 89 mm of even, level bearing, which means you can trace the fastening requirement to the actual assembly.
The hold point and the trades waiting after it
Ontario's Part 9 notice point combines substantial completion of structural framing with heating and air-conditioning ductwork and piping. That means your sequence must reach that visible hold point before finishes. The permit holder requests municipal inspections, which means you can plan the following trade around the stated response.
The prescribed response after notice is two days, excluding weekends, holidays and closed-office days. That means your mechanical and electrical work may have to be complete before the framing review. Drywall and firestopping trades inherit vertical and horizontal suite-boundary framing, which means you avoid reopening work the municipality needed to see.
What to send for a useful quote
Address, zoning result, permit status and approved three-unit plans, which means you give the estimator the current design basis. Unit arrangement, common corridors, stairs, entrances and suite-boundary assemblies, which means your takeoff can include the scheduled members and openings. Add the address, permit status and target start window, so you can separate what is ready to price from what still needs a decision.
Comparing framing quotes?
Ours names what we frame, what another trade supplies, and what has to be settled before we mobilise. Compare the scope, not two totals built on different assumptions.
Finished On Site
Framed on site and built to last
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
- Coordinated with the surrounding build
- Code-minded framing for real-world use
- Quote-ready support from plans to inspection
FAQ
Triplex Framing FAQ
Does triplex framing need a permit in Toronto?
It depends on whether the scope is permit work. Toronto requires a building permit for a new building, an addition and structural alterations.
What must be ready for the local inspection?
The issued permit package and the work for that inspection stage must be ready. Keep the permit-approved drawing set on site and keep permit work visible for its required inspection.
Can Triplex Framing materials or equipment use public space?
Only when the applicable municipal approval allows it. A street-occupation permit is required when the delivery, crane, bin or material storage occupies the public right of way, including a public lane.
What should I send for a triplex framing quote?
Send the address, current architectural and structural drawings, permit status and clear site photos. For this scope, the quote also needs structural changes, unit layout, separations, openings, services and access plus the proposed route for lumber, engineered members and site access.
Not sure the drawings are ready?
Most are not, and that is fine. Send what you have and we will tell you what is missing before it costs you a week on site.
More in Toronto
Everything we frame in Toronto
Framing services across Toronto. See all framing in Toronto →
Triplex Framing in nearby areas
Explore our full Triplex Framing service Our Work
View Our Projects See real projects across Toronto & Ontario
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Request a triplex framing quote in Toronto
Send the current drawings, property address, permit status and target start. We will check the package around a one-unit-per-storey layout concentrates suite separation in two floor-ceiling planes,, so you can resolve a missing structural, access or coordination decision before it becomes a site delay.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Send your project details
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Triplex Framing Near Toronto
View all service areas →Timberr Framing provides triplex framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Trusted by Leading Organizations
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.
Tim Hortons 
Subway 
University of Toronto 
Madison Group 
RioCan 
Women's College Hospital 
Starbucks 
Mazda 
TD Bank 
City of Toronto 
Popeyes Tim Hortons Subway University of Toronto Madison Group RioCan Women's College Hospital Starbucks Mazda TD Bank City of Toronto Popeyes