Built to plan
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Framing in Oshawa
Post and Beam Framing in Oshawa
Post and beam framing in Oshawa and across the GTA, built to your drawings and the Ontario Building Code. Timberr Framing is licensed, insured and WSIB-covered, rated 5.0 on Google, with a workmanship warranty behind every job.
- Licensed, Insured & WSIB-Covered
- Backed by our workmanship warranty
- 5.0 on Google
Get your Oshawa framing quote
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
5.0 on Google
Workmanship warranty, we stand behind our work Licensed, Insured & WSIB-Covered Completed to code & Ontario requirements Custom-framed to your plans Serving the GTA & surrounding area
What You Get
What to expect from post and beam framing in Oshawa
Built to last
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Quote-ready
Send specs, drawings, or photos and get a free, no-obligation site visit and estimate with no guesswork.
Code-conscious
Installation and site work completed in accordance with Ontario requirements.
Our Process
How our post and beam framing process works
Ready to price post and beam framing?
Send the drawings, or just the address and what you are building. We will tell you what is missing and what happens next.
What GTA clients say
5.0 · Verified reviews on Google B Brookevia Google
★★★★★
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
T Trudyvia Google
★★★★★
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
W Williamvia Google
★★★★★
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
S Sokratisvia Google
★★★★★
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
E Ericavia Google
★★★★★
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
C Cesarvia Google
★★★★★
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
Local Context
Post and Beam Framing in Oshawa
Understanding post and beam framing
What changes the site plan in Oshawa
Oshawa Building Services issues and inspects local building permits. Scaled plans must show materials, sizes, spans and dimensions. A site plan or survey shows property lines, driveways and existing plus proposed buildings for most projects.
Oshawa can require roadway restoration when work affects curbs, sidewalks or paved boulevards, so the post-and-beam frame records affected road edges. Grade, drainage or work close to a property line can trigger a site-alteration permit.
What belongs in the Oshawa site scope
At the address, we verify post locations, beam elevations, bearing and connections. We also confirm the current municipal approval status and the route for heavy members, connectors and lifting access. That route is checked without assuming municipal road space is available.
The quote separates member size and weight, spans, connections, finish, lifting and access, together with any road, grading, heritage or inspection condition triggered at this property. Timberr schedules the project from the GTA or York Region after those inputs are settled. Unresolved design and access conditions remain named rather than hidden inside the framing allowance.
The systems and conditions that change the work
A concealed built-up beam, exposed timber frame and engineered glulam frame have different appearance, moisture, connection and fire-design requirements. That means your engineer may need to settle the load path before material is ordered.
A beam supporting floor joists can receive them on top or at its side. But side framing needs the prescribed or designed support, which means your quote carries the matching member layout, connector schedule and site handling.
Exterior posts and beams require durability, drainage and exposure details not inferred from interior framing provisions. That means you get the route supported by the drawings instead of a choice made from habit.
A post beneath a point load differs from a decorative post that carries no structural load, which means your following trades inherit that system's spacing, openings and limits.
The mistake we want found before the work begins
A post placed on a finished floor can appear perfectly aligned while the reaction lands between the supports beneath it. The beam is correct, the post is correct and the floor below is still overloaded. We trace every post to a footing or designed transfer before its location is fixed.
Plans, sequencing, and site decisions
Member and fastening decisions that affect the result
Part 9 beams require even and level bearing, with at least 89 mm end bearing unless the applicable span-table note states otherwise. That means your installed member must match the grade or product shown in the design. Individual members in a nailed built-up wood beam must be at least 38 mm thick and installed on edge. That means you can verify the material condition before it is enclosed.
A butt joint in a built-up beam generally occurs over a support, subject to the continuous-beam quarter-point provisions. That means your bearing and connection detail must preserve that capacity. The prescriptive double-row nailing option for 38 mm built-up beam members uses nails at least 89 mm long at no more than 450 mm spacing in each row. That means you can trace the fastening requirement to the actual assembly.
The hold point and the trades waiting after it
The permit holder is responsible for notifying the municipal building department at required inspection stages, which means your sequence must reach that visible hold point before finishes. Footing, anchor, post, beam and connector work should remain visible until the applicable inspection is complete, which means you can plan the following trade around the stated response.
Floor and roof trades inherit beam elevation, crown orientation where specified, connector installation and opening locations. That means your mechanical and electrical work may have to be complete before the framing review. Exterior-envelope trades inherit penetrations, flashings and continuity around exposed structural members, which means you avoid reopening work the municipality needed to see.
What to send for a useful quote
Structural plans, member and reaction schedules, connection details and revisions, which means you give the estimator the current design basis. Footing, foundation, anchor and bearing elevations, which means your takeoff can include the scheduled members and openings. Add the address, permit status and target start window, so you can separate what is ready to price from what still needs a decision.
Comparing framing quotes?
Ours names what we frame, what another trade supplies, and what has to be settled before we mobilise. Compare the scope, not two totals built on different assumptions.
Finished On Site
Framed on site and built to last
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
- Coordinated with the surrounding build
- Code-minded framing for real-world use
- Quote-ready support from plans to inspection
FAQ
Post and Beam Framing FAQ
Will Timberr take on post-and-beam framing in Oshawa?
Yes, when the drawings, site access and schedule support the project. Timberr takes on suitable Oshawa work from its GTA and York Region service base, with mobilisation tied to the booked address.
Does this work need a building permit from Oshawa?
It depends on whether the proposed scope is permit work. Oshawa requires a permit for new buildings, additions, alterations and finished basements.
What must be ready for the municipal inspection?
The issued permit package and the work assigned to that inspection stage must be ready. Present the work against Oshawa-approved plans and specifications at the required inspection stage.
What can delay the crew start in Oshawa?
Unresolved access approval or an incomplete material route can delay mobilisation. Roadway restoration and site-alteration requirements can apply when trucks, grading or construction affect the boulevard or curb. The quote also needs member size and weight, spans, connections, finish, lifting and access.
Not sure the drawings are ready?
Most are not, and that is fine. Send what you have and we will tell you what is missing before it costs you a week on site.
More in Oshawa
Everything we frame in Oshawa
Framing services across Oshawa. See all framing in Oshawa →
Our Work
View Our Projects See real projects across Toronto & Ontario
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Request a post and beam framing quote in Oshawa
Before the Oshawa post and beam handoff, send the drawings, address, timing, and known site conditions. For the Oshawa post and beam crew, Timberr will identify what the scope needs for a reliable quote and framing schedule.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Send your project details
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Post and Beam Framing Near Oshawa
View all service areas →Timberr Framing provides post and beam framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Trusted by Leading Organizations
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.
Tim Hortons 
Subway 
University of Toronto 
Madison Group 
RioCan 
Women's College Hospital 
Starbucks 
Mazda 
TD Bank 
City of Toronto 
Popeyes Tim Hortons Subway University of Toronto Madison Group RioCan Women's College Hospital Starbucks Mazda TD Bank City of Toronto Popeyes