Built to plan
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Custom Framing
Back Framing
Back framing across Toronto, the GTA and the Golden Horseshoe, built to your drawings and the Ontario Building Code. Timberr Framing is licensed, insured and WSIB-covered, rated 5.0 on Google, with a workmanship warranty behind every job.
- Licensed, Insured & WSIB-Covered
- Backed by our workmanship warranty
- 5.0 on Google
Get your framing quote
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
5.0 on Google
Workmanship warranty, we stand behind our work Licensed, Insured & WSIB-Covered Completed to code & Ontario requirements Custom-framed to your plans Serving the GTA & surrounding area
What You Get
What to expect from back framing
Built to last
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Quote-ready
Send specs, drawings, or photos and get a free, no-obligation site visit and estimate with no guesswork.
Code-conscious
Installation and site work completed in accordance with Ontario requirements.
Our Process
How the work moves from drawings to handoff
Ready to price back framing?
Send the drawings, or just the address and what you are building. We will tell you what is missing and what happens next.
What GTA clients say
5.0 · Verified reviews on Google B Brookevia Google
★★★★★
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
T Trudyvia Google
★★★★★
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
W Williamvia Google
★★★★★
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
S Sokratisvia Google
★★★★★
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
E Ericavia Google
★★★★★
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
C Cesarvia Google
★★★★★
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
How It Gets Built
More about back framing
Understanding back framing
The systems and conditions that change the work
Board-edge support, fixture backing, millwork backing, handrail backing, ceiling furring and service framing serve different loads and finish tolerances. That means your engineer may need to settle the load path before material is ordered.
Structural blocking transfers load or restrains members and cannot be selected from a non-structural backing schedule. That means your quote carries the matching member layout, connector schedule and site handling.
Fire blocks divide concealed spaces and must use permitted materials and maintain effectiveness around penetrations. That means you get the route supported by the drawings instead of a choice made from habit.
Wood backing is permitted in some noncombustible building assemblies for handrails, fixtures, shelves, cabinets and counters, subject to the applicable Code conditions. That means your following trades inherit that system's spacing, openings and limits.
What belongs in the scope
Back framing must not be confused with structural reinforcement or fire blocking, which have separate design and Code functions, so the back boundary is fixed before award. In permitted alterations, backing and furring must remain consistent with the approved wall, ceiling and fire-separation assemblies. That means your quote can name exclusions and owner-supplied items instead of hiding them.
Wall and ceiling area, detail count and finish changes set blocking and furring quantity, so measured back quantities control the takeoff. Cabinet, handrail, equipment and accessory schedules add localized backing, which means you can compare the selected member schedule rather than a generic allowance. Rated assemblies and concealed-space fire blocks add material and coordination, so back coordination is visible before approval.
The mistake we want found before the work begins
A note that says backing without naming the supported item is not a usable instruction. The crew can fill the wall with wood and still miss the exact rail or cabinet line, leaving the finish trade to open it again. We coordinate the real elevation and load before installing the support.
Member and fastening decisions that affect the result
Corners and intersections must support vertical edges of interior finishes, sheathing and cladding. Exterior wood-frame corners require at least the equivalent of two studs. That means your installed member must match the grade or product shown in the design. Where blocking or furring supports finish edges at wall intersections, support spacing cannot exceed the Section 9.29 limit. That means you can verify the material condition before it is enclosed.
Wood furring sizes and spacing are controlled by Table 9.29.3.1, which means your bearing and connection detail must preserve that capacity. Wood furring is fastened to framing or wood blocks with nails at least 51 mm long under the prescriptive provision. That means you can trace the fastening requirement to the actual assembly.
Plans, sequencing, and site decisions
The hold point and the trades waiting after it
Your municipality requires scaled and dimensioned drawings for permitted non-residential interior alterations, which means your sequence must reach that visible hold point before finishes. Municipal framing inspection checklists do not replace full Code and permit-document compliance, which means you can plan the following trade around the stated response.
Board installers inherit support at corners, intersections and panel edges, which means your mechanical and electrical work may have to be complete before the framing review. Millwork, handrail and equipment installers inherit concealed backing location and capacity, which means you avoid reopening work the municipality needed to see.
Planning the work across the GTA
Ontario sets the building rules while the municipality administers the permit and inspection for the address, which means your approved set must settle board-edge before work is covered. Your site decides the delivery, storage and lifting route for that system. So you get a different sequence for a clear subdivision lot, a tight infill lane or an occupied commercial unit.
What to send for a useful quote
Wall types, ceiling plans, finish details and rated-assembly schedules, which means you give the estimator the current design basis. Millwork, handrail, equipment and accessory shop drawings, which means your takeoff can include the scheduled members and openings. Add the address, permit status and target start window, so you can separate what is ready to price from what still needs a decision.
Comparing framing quotes?
Ours names what we frame, what another trade supplies, and what has to be settled before we mobilise. Compare the scope, not two totals built on different assumptions.
Finished On Site
Framed on site and built to last
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
- Coordinated with the surrounding build
- Code-minded framing for real-world use
- Quote-ready support from plans to inspection
FAQ
Back Framing FAQ
Can my house or property take this back framing work?
The existing frame can take the attachment only when the backing and its connection suit the actual load. Decorative blocking is not structural support.
How disruptive will the back framing work be?
The work is least disruptive before board. In a finished space, access and repair expand because the support sits behind the surface.
What is most likely to go wrong?
A note that says backing without naming the supported item is not a usable instruction. The crew can fill the wall with wood and still miss the exact rail or cabinet line, leaving the finish trade to open it again.
Who is accountable if the site does not match the drawings?
Timberr owns stopping, documenting and explaining the framing conflict. The engineer or designer approves structural changes, and we build the written answer instead of improvising inside your house.
Not sure the drawings are ready?
Most are not, and that is fine. Send what you have and we will tell you what is missing before it costs you a week on site.
Our Work
View Our Projects See real projects across Toronto & Ontario
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Request a back framing quote
Send the current drawings, property address, permit status and target start. We will check the package around board-edge, so you can resolve a missing structural, access or coordination decision before it becomes a site delay.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Send your project details
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Back Framing Across the GTA
View all service areas →Timberr Framing provides back framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Trusted by Leading Organizations
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.
Tim Hortons 
Subway 
University of Toronto 
Madison Group 
RioCan 
Women's College Hospital 
Starbucks 
Mazda 
TD Bank 
City of Toronto 
Popeyes Tim Hortons Subway University of Toronto Madison Group RioCan Women's College Hospital Starbucks Mazda TD Bank City of Toronto Popeyes