Built to plan
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Framing in Oshawa
Metal Stud Framing in Oshawa
Metal stud framing in Oshawa and across the GTA, built to your drawings and the Ontario Building Code. Timberr Framing is licensed, insured and WSIB-covered, rated 5.0 on Google, with a workmanship warranty behind every job.
- Licensed, Insured & WSIB-Covered
- Backed by our workmanship warranty
- 5.0 on Google
Get your Oshawa framing quote
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
5.0 on Google
Workmanship warranty, we stand behind our work Licensed, Insured & WSIB-Covered Completed to code & Ontario requirements Custom-framed to your plans Serving the GTA & surrounding area
What You Get
What to expect from metal stud framing in Oshawa
Built to last
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Quote-ready
Send specs, drawings, or photos and get a free, no-obligation site visit and estimate with no guesswork.
Code-conscious
Installation and site work completed in accordance with Ontario requirements.
Our Process
How our metal stud framing process works
Ready to price metal stud framing?
Send the drawings, or just the address and what you are building. We will tell you what is missing and what happens next.
What GTA clients say
5.0 · Verified reviews on Google T Trudyvia Google
★★★★★
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
S Sokratisvia Google
★★★★★
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
B Bryanvia Google
★★★★★
The responsive and reliable team at Timberr Framing handled our metal stud framing with precision in our commercial building! Their industry expertise and strong workmanship made the project a success.
M Michaelvia Google
★★★★★
We needed metal stud framing for our office, and Timberr Framing delivered. Their team was professional, skilled, and got the job done quickly without sacrificing quality.
Local Context
Metal Stud Framing in Oshawa
Understanding metal stud framing
What changes the site plan in Oshawa
Oshawa Building Services issues and inspects local building permits. Scaled plans must show materials, sizes, spans and dimensions. A site plan or survey shows property lines, driveways and existing plus proposed buildings for most projects.
Oshawa can require roadway restoration when work affects curbs, sidewalks or paved boulevards, so the metal-stud package records affected road edges.
What belongs in the Oshawa site scope
At the address, we verify partition lines, openings, head details and backing. We also confirm the current municipal approval status and the route for studs, track, board interfaces and occupied-site access. That route is checked without assuming municipal road space is available.
The quote separates wall length, height, gauge, spacing, openings, ratings, backing and access, together with any road, grading, heritage or inspection condition triggered at this property. Timberr schedules the project from the GTA or York Region after those inputs are settled. Unresolved design and access conditions remain named rather than hidden inside the framing allowance.
The systems and conditions that change the work
A Part 9 non-loadbearing partition can use the prescriptive stud tables only within their stated wall-height, spacing, finish and material assumptions. That means your engineer may need to settle the load path before material is ordered.
Loadbearing cold-formed steel framing is not a heavier version of the Part 9 partition table; it requires Part 4 design. That means your quote carries the matching member layout, connector schedule and site handling.
Exterior non-loadbearing steel studs have a separate size, thickness, spacing and maximum-length table from interior partitions. That means you get the route supported by the drawings instead of a choice made from habit.
A fire-rated partition is governed by its complete assembly, including head clearance, board layers, fasteners, openings and penetrations, rather than stud depth alone. That means your following trades inherit that system's spacing, openings and limits.
The mistake we want found before the work begins
A fire-rated partition can be built straight and still be wrong if its studs are fixed tightly at a head detail designed to accommodate movement. The ceiling moves, the wall cannot, and the approved assembly has been changed where nobody sees it. We verify the head condition before the first track is installed.
Plans, sequencing, and site decisions
Member and fastening decisions that affect the result
Steel studs and runners within OBC Section 9.24 must conform to the product standard named in Article 9.24.1.2. That means your installed member must match the grade or product shown in the design. The metal thickness stated in Section 9.24 is minimum base-steel thickness and excludes coatings, which means you can verify the material condition before it is enclosed.
Non-loadbearing interior studs covered by the prescriptive provision require a base-steel thickness of at least 0.46 mm unless the opening rules require more. That means your bearing and connection detail must preserve that capacity. Interior and exterior runners must be at least as thick as their corresponding studs and must have flanges at least 30 mm deep. That means you can trace the fastening requirement to the actual assembly.
The hold point and the trades waiting after it
Permit applications for non-residential alterations require scaled, dimensioned, signed and dated drawings. Professional general-review commitments can be required where the Code calls for professional design and field review. That means your sequence must reach that visible hold point before finishes. The permit holder is responsible for contacting the municipality when the work reaches a prescribed inspection stage such as structural framing. That means you can plan the following trade around the stated response.
Board installers inherit stud alignment, spacing, supported corners and edges, screw substrate and the required rated-assembly geometry. That means your mechanical and electrical work may have to be complete before the framing review. Door and glazing installers inherit the opening width, height, jamb build-up and header condition established by the framing. That means you avoid reopening work the municipality needed to see.
What to send for a useful quote
Floor plans, reflected-ceiling plans, wall-type schedule and full-height details, which means you give the estimator the current design basis. Occupancy, permit scope, fire-resistance and acoustic requirements for every wall type, which means your takeoff can include the scheduled members and openings. Add the address, permit status and target start window, so you can separate what is ready to price from what still needs a decision.
Comparing framing quotes?
Ours names what we frame, what another trade supplies, and what has to be settled before we mobilise. Compare the scope, not two totals built on different assumptions.
Finished On Site
Framed on site and built to last
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
- Coordinated with the surrounding build
- Code-minded framing for real-world use
- Quote-ready support from plans to inspection
FAQ
Metal Stud Framing FAQ
Will Timberr take on metal stud framing in Oshawa?
Yes, when the drawings, site access and schedule support the project. Timberr takes on suitable Oshawa work from its GTA and York Region service base, with mobilisation tied to the booked address.
Does this work need a building permit from Oshawa?
It depends on whether the proposed scope is permit work. Oshawa requires a permit for new buildings, additions, alterations and finished basements.
What must be ready for the municipal inspection?
The issued permit package and the work assigned to that inspection stage must be ready. Present the work against Oshawa-approved plans and specifications at the required inspection stage.
What can delay the crew start in Oshawa?
Unresolved access approval or an incomplete material route can delay mobilisation. Roadway restoration and site-alteration requirements can apply when trucks, grading or construction affect the boulevard or curb. The quote also needs wall length, height, gauge, spacing, openings, ratings, backing and access.
Not sure the drawings are ready?
Most are not, and that is fine. Send what you have and we will tell you what is missing before it costs you a week on site.
More in Oshawa
Everything we frame in Oshawa
Framing services across Oshawa. See all framing in Oshawa →
Our Work
View Our Projects See real projects across Toronto & Ontario
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Request a metal stud framing quote in Oshawa
Before the Oshawa metal stud handoff, send the drawings, address, timing, and known site conditions. For the Oshawa metal stud crew, Timberr will identify what the scope needs for a reliable quote and framing schedule.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Send your project details
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Metal Stud Framing Near Oshawa
View all service areas →Timberr Framing provides metal stud framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Trusted by Leading Organizations
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.
Tim Hortons 
Subway 
University of Toronto 
Madison Group 
RioCan 
Women's College Hospital 
Starbucks 
Mazda 
TD Bank 
City of Toronto 
Popeyes Tim Hortons Subway University of Toronto Madison Group RioCan Women's College Hospital Starbucks Mazda TD Bank City of Toronto Popeyes