Built to plan
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Deck and porch framing in Innisfil and across the GTA, built to your drawings and the Ontario Building Code. Timberr Framing is licensed, insured and WSIB-covered, rated 5.0 on Google, with a workmanship warranty behind every job.
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a free, no-obligation site visit and estimate with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Send the drawings, or just the address and what you are building. We will tell you what is missing and what happens next.
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
Innisfil issues and inspects its own building permits. Alteration and addition drawings must distinguish existing construction from new work. Town road permits separately cover road occupancy and new or altered entrances.
Innisfil lists mandatory inspections in construction order on the permit, so the deck or porch frame follows its printed permit order. A grading consultant certificate and final lot-grading inspection can apply.
At the address, we verify footings, ledger condition, beam bearing, stairs and guards. We also confirm the current municipal approval status and the route for exterior lumber, connectors and yard access. That route is checked without assuming municipal road space is available.
The quote separates area, height, spans, footings, ledger, stairs, guards and access, together with any road, grading, heritage or inspection condition triggered at this property. Timberr schedules the project from the GTA or York Region after those inputs are settled. Unresolved design and access conditions remain named rather than hidden inside the framing allowance.
An attached deck transfers lateral and vertical forces through its house connection; a freestanding deck uses independent support. The issued design must identify which system applies, which means your engineer may need to settle the load path before material is ordered.
A porch can add columns, roof framing and connections to the existing building that an uncovered deck does not have. That means your quote carries the matching member layout, connector schedule and site handling.
Ground-level detached platforms can have different permit treatment from attached or elevated decks. That means you get the route supported by the drawings instead of a choice made from habit.
Guards are required where the elevation difference exceeds 600 mm within the distance specified by OBC 9.8.8.1, subject to listed exceptions. That means your following trades inherit that system's spacing, openings and limits.
A ledger fastened through unsupported cladding can look tight while never reaching the structure meant to carry the deck. Once the surface is finished, the weak connection is both loaded and hidden. We expose or verify the approved structural attachment before the first joist is hung.
Toronto requires deck and porch plans to identify footing size, spacing, depth, above-grade height and frost protection. That means your installed member must match the grade or product shown in the design. The same guide requires column sizes and locations plus beam sizes, locations and spans, which means you can verify the material condition before it is enclosed.
Joists require at least 38 mm of end bearing unless the permitted support condition applies, which means your bearing and connection detail must preserve that capacity. Beam ends generally require at least 89 mm of even, level bearing, which means you can trace the fastening requirement to the actual assembly.
Toronto's permit guide requires scaled, dimensioned, signed and dated drawings and site information tied to a current survey. That means your sequence must reach that visible hold point before finishes. Ontario places inspection-request responsibility on the permit holder, which means you can plan the following trade around the stated response.
Markham states that its checklists do not replace full compliance with permit documents and the Code. That means your mechanical and electrical work may have to be complete before the framing review. Guard installers inherit post anchorage and blocking concealed by the deck surface, which means you avoid reopening work the municipality needed to see.
Survey or site plan, zoning result, permit status, setbacks, grade and easements, which means you give the estimator the current design basis. Footing, post, beam, joist, ledger and connector details, which means your takeoff can include the scheduled members and openings. Add the address, permit status and target start window, so you can separate what is ready to price from what still needs a decision.
Ours names what we frame, what another trade supplies, and what has to be settled before we mobilise. Compare the scope, not two totals built on different assumptions.
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
Yes, when the drawings, site access and schedule support the project. Timberr takes on suitable Innisfil work from its GTA and York Region service base, with mobilisation tied to the booked address.
It depends on whether the proposed scope is permit work. Innisfil administers its own building permits, with planning, heritage or road approvals added by address.
The issued permit package and the work assigned to that inspection stage must be ready. Request the mandatory inspections in the construction order printed on the permit.
Unresolved access approval or an incomplete material route can delay mobilisation. A Town road permit can be required for road occupancy or a new or altered property entrance. The quote also needs area, height, spans, footings, ledger, stairs, guards and access.
Most are not, and that is fine. Send what you have and we will tell you what is missing before it costs you a week on site.
Framing services across Innisfil. See all framing in Innisfil →
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
For this Innisfil deck and porch review, send the drawings, address, timing, and known site conditions. Within the Innisfil deck and porch package, Timberr will identify what the scope needs for a reliable quote and framing schedule.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Timberr Framing provides deck and porch framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.